Last updated 10 October 2018
Labs And Test Reports
The fifth screen of the application form is Labs and Test Reports.
Watch our video walkthrough to see how to complete this page.
Alternatively, you can follow the detailed instructions outlined
below.
Testing requirements for your product
You will need to provide details of the testing that was conducted
on the product/s you are registering. For this, one or more test
reports must be uploaded. For instructions on how to properly test
your product,
click here.
You must test products that are to be registered. However, if an
equivalent product has been tested and registered previously, then
you can provide the registration number for that product instead.
If you do not have a test report to upload, you may still continue,
however, the regulator will require more information before your
application can be approved. For information on contacting your
regulator,
click here.
Registering a product that relies on a test report from an
equivalent product (without a test report)
To register a product that relies on a test report from an
equivalent product (without a test report):
-
For “Is a test report provided?” select “No – no test report
available but registration details containing test relevant to
this product provided”. You can only select No if you have an
equivalent product that has already been registered.
-
For “Registration number of the unit whose test forms the basis
of this application”, you will need to provide the registration
number of the equivalent product.
-
For “Comments”, please include any details regarding the testing
that was undertaken that the regulator will need to take into
account while assessing your application for registration.
Registering a product with a test report
Figure 1: Test report details page – Test Reports
To register a product with a test report:
-
For “Is a test report provided?” select “Yes” - test report is
provided.
-
For “What type of test report is provided?” select the type of
test report you are providing.
-
For “What test standard was used?” select the test standard that
you used to test your appliance.
This selection changes depending upon the determination /
standard you a registering against. If you need more information
about the test standards, refer to the relevant section of the
product determination or regulatory standard.
-
For “Which laboratory performed the testing?” select the
laboratory where the testing took place.
For information on how to manage your laboratories,
click here.
-
For the “Test Reports” sub-section, complete the following
steps:
-
In the “Report Number” field, include the report number.
This is the number that is provided by the test
laboratory as it appears on the report.
-
In the “Report Signatory” field, include the name of the
person who signed the test report.
-
For “Test Date”, select the date from the calendar that
will appear when you click on the text box provided.
-
In the “Test Unit Serial Number” field, enter the serial
number of the specific unit that was tested.
-
For “Upload the test report”, upload an electronic copy
of the test report. For assistance in uploading files,
click here.
-
If you need to add another test report and it is
applicable (i.e. because you are registering more than
one product), select the “add another test report” link
and repeat steps a-e.
Figure 2: Test report details page – Comments
-
For “Comments”, include any details regarding the testing that
was undertaken that the regulator will need to take into account
while assessing your application for registration.
After you have completed the relevant test report details:
-
Select the “Save” button if you want to check the page for
errors, or leave the application and continue it at a later
date.
-
Select the “Save and Continue” button to save your page and
continue with the application.